Our best selling MTB shoe covers are back with all new paneling, rear closure, and Kevlar bottom providing exceptional heat and weather condition protection. 3mm neoprene building is fleece lined to offer optimum heat and protection. Innovative power band protects front of shoe cover under toes. 2 stage hook and loop closure offers both sleek fit and simple on and off.
3mm neoprene construction is fleece lined to provide optimal warmth and protection
Innovative power band secures front of shoe cover under toes
Two stage hook and loop closure provides both sleek fit and easy on and off
48% neoprene 24% polyester 17.5% nylon 7% polyurethane 2% spandex 1% CorduraÂ® nylon .5% KevlarÂ® aramid; Use simple detergents with no additives; Never use detergents with fabric softeners, perfumes or any additive type product; The general rule of thumb is the simpler the better.; Many detergents with additives leave "surfactants" behind on a fabric's fibers that inhibit the technical performance; Typically the best detergents to use will have "Clear" or "Free" in their names; Don't pour the detergent directly onto the clothing, put it in the washer first, when you start the water; If something is not functionally working, but is not dirty, try rinsing it twice in warm to hot water; This will help get rid of the harmful surfactants. Read the care content label; On the inside of your garment, or on the hangcard, there are instructions for the care of that individual piece; On garments this will be on a side seam or back seam label. Follow those directions; On finer fabrics, use a "Gentle" cycle. Close all zippers, attach "hook and loop" closures on gloves You can use the dryer, carefully; If you use a dryer be sure to use a lower / warm heat setting (Do NOT use a commercial dryer or a "Hot" setting); This will often restore the fabric and help the water and wind repellent qualities; If in doubt, hang the clothing to dry.